Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Start/stop cleaning
Preparation
The side brushes are installed on both sides of
the bottom of the main machine.
Automatic charging/APP network
Short press the automatic
Manual charging
recharge button to start
automatic charging/stop
charging
When the cleaning is
completed or the remaining
Automatic charging
battery power is lower than
20%, the robot will automati-
cally move to the charging
dock and start charging
automatically.
The robot will automatically
Break point resume
resume previous unfinished
task when the its charging
power reaches 80% or higher.
Long press this button to start
-��-
-��-
-��-
the APP network connection;
APP network
Please refer to page 6 for
connection
details (Product structure)
-��-
-13-
-��-
-��-
Power on/Start
Power ON
Press Start and hold the power button for more
than 3 seconds to turn on the power.
Start cleaning
After turning on the machine, short press
the power button to start cleaning.
Stop cleaning/Power
During the cleaning
process, short press the
Stop cleaning
power button to pause
cleaning.
Press and hold the power
button for more than 3
Turn off the power
seconds to turn off the
power.
· The power cannot be turned off while
charging. Please turn off the power after
disconnecting from the charging dock.
• By installing the "Zoef Robot Smart" APP, you can use your smartphone
to perform various functions.
Notes
• For detailed instructions on how to use the APP, please refer to the
attached APP User Guide.
Automatic cleaning
After starting up, the robot vacuum cleaner will
pause for mapping and positioning, then start
to create maps along the corner scanning
environment, and then plan the cleaning path
in an "S" shape. The robot will automatically
create a cleaning area, clean efficiently in
sequence, and automatically return to the
charging dock to charge after cleaning.
Area selection cleaning
First, set the cleaning area in the APP, and the
scanned map will be displayed in the APP. You
only need to touch the area to be cleaned, and
then click "Save", and the robot will automati-
cally move to the designated area for cleaning
Specific-area cleaning
Click "specific-area cleaning" in the APP, click
"add area", a virtual box appears on the map,
move the box to the designated cleaning area,
and then click "Start" to start the robot moving
to the designated area for cleaning.
APP user guide
room 1
room4
room 2
room5
room 3
room 1
room4
room 3
room 2
room5
-��-
-��-
-��-
-14-
-��-
-��-
-�
-��-
Werbung
