Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product structure
Diagram of water tank
Rubber stopper
Water inlet
Release button
Charging dock
Power indicator
Signal output sensor
Charging terminal
-��-
-��-
-��-
-�-
-�-
-9-
-�-
-�-
Mop
Mop holder
Water outlet
1. The indicator light will turn
off when it is working.
2. The indicator light stands
on indicates standby mode
of the charging dock.
• ·When charging the robot vacuum cleaner, if the water tank is in the
main machine, Please check whether there is water in the 2-in-1
Notes
water tank/dust collection box. If there is water, please empty it
before proceeding.
• When charging, if you apply pressure to the charging terminal by
hand or a charged object, it may cause personal injury.
• Do not install the charging dock in a damp place or in a place where
the sun shines directly.
• Place the charging dock on a
flat surface, close to the wall,
press the power button on the
main machine until the
indicator lights up, and then
connect the charging adapter
to the socket.
• There must be a space around
the charging dock (2m in front
and 1m on the left and right
sides).
• When placing the charging
dock, please place the back of
the charging dock against the
wall in a shaded place.
How to use the charging dock
Space 3CM
• Press the power button on the main
machine until the indicator lights up,
and then connect the charging
terminal of the charging dock to
charge.
• When the battery is low and the
power cannot be turned off, the
battery must have at least 20%
remaining power to run normally.
• If the position of the charging dock
changes, the robot may not be able
to find the previously saved route.
-��-
-��-
-��-
-10-
-�-
-��-
-��-
-�-
Werbung
