Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.8
Loading and saving a user profile
The menu "Profiles" serves to select between a default profile and up to 5 user profiles. A profile is a collection of
all settings and set values. Upon delivery, or after a reset, all 6 profiles have the same settings and all set values
are 0. If the user changes settings or sets target values then these create a working profile which can be saved to
one of the 5 user profiles. These profiles or the default one can then be switched. The default profile is read-only.
The purpose of a profile is to load a set of set values, settings limits and monitoring thresholds quickly without
having to readjust these. As all HMI settings are saved in the profile, including language, a profile change can also
be accompanied by a change in HMI language.
On calling up the menu page and selecting a profile the most important settings can be seen, but not changed.
► How to save the current values and settings as a user profile
1.
While the DC output is switched off, press button
2.
In the menu use the arrow buttons (↓, ↑) to navigate to "Pro-
files", then press
3.
In the selection screen select one of the user profiles 1-5 submenus by using the arrow buttons.
4.
In the submenu you can view, load or save the profile by selecting the corresponding entry and pressing
5.
Select "Save settings in Profile x" and confirm with
Loading a profile is done the same way.
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
.
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
PS 3000 C Series
.
www.elektroautomatik.de
ea1974@elektroautomatik.de
.
Page 47
Werbung
