cecotec READYWARM 2000 MAX CERAMIC ROTATE DESIGN Bedienungsanleitung Seite 34

ENGLISH
1. PARTS AND COMPONENTS
1. Handle
2. Function knob
3. Rear part of the air outlet
4. Oscillation switch
5. Air outlet
6. Base
7. Power cable
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
This device is packaged in a way as to protect it during transport. Take the device out
-
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any
-
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
Heater
-
Instruction manual
-
3. OPERATION
Plug the appliance.
-
Push the unit backwards to make use of the different angles. Fig 2.
-
Power and temperature settings
Fig. 3.
- Turn the function knob and choose the mode you want the heater to operate in.
- The available functions are:
34
READYWARM 2000 MAX CERAMIC ROTATE DESIGN