Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FR
EN
DE
Harness user's manual | EVO LITE 2
CONNECTING WING TO THE HARNESS
Connecting the glider to the harness.
Without twisting the risers, connect them to the harness attachment loops using the self-locking
carabiners.
Check for the risers to be properly positioned and untwisted. The «A» risers must be located at the front
and facing the flight direction (see diagram).
Finally, check that the carabiners are properly closed.
Riser A
Installing the accelerator.
Install the speedbar by following the previous instructions.
Connect it to the glider using the split hooks.
Once the accelerator/speedbar is connected adjust its length
according to the glider recommended measurements.
Automatic
carabiner
Harness
Flight direction
EVO LITE 2 | page 37
Werbung
