SUPAIR EVO LITE 2 Betriebshandbuch Seite 69

Harness user's manual | EVO LITE 2
Fastening the risers to the harness with a set of 6mm square Maillons Rapides®
1
- Open the 6mm Mail- - Push the riser con-
lon Rapide®. necting point through
the toric ring loop.
- Push the toric ring
through the Maillon - Push the riser in the
Rapide® and twist it. 6mm Maillon Rapide®.
FR EN
INSTALLING THE RESERVE PARACHUTE
Riser/Harness connection :
2 3
- Give the toric ring a
second twist.
DE
4
Push the riser end loop
through the Maillon
Rapide®.
5
- Check that the risers do not move.
- Close the Maillon Rapide® by hands
and tighten with a 1/4 turn using set of
pliers.
- Repeat the procedure with the second
riser.
EVO LITE 2 | page 21