Werbung
Disclaimer
By using this product, you signify that you have read, understand, and accept the terms
and conditions of this guide and all instructions at https://enterprise.dji.com/zenmuse-l2/
downloads. EXCEPT AS EXPRESSLY PROVIDED IN AFTER-SALES SERVICE POLICIES AVAILABLE AT
HTTPS://WWW.DJI.COM/SERVICE/POLICY, THE PRODUCT AND ALL MATERIALS AND CONTENT
AVAILABLE THROUGH THE PRODUCT ARE PROVIDED "AS IS" AND ON "AS AVAILABLE BASIS"
WITHOUT WARRANTY OR CONDITION OF ANY KIND.
Warnings
TM
1. The ZENMUSE
L2 has been calibrated specifically for the designated camera and lens
before leaving the factory. No physical or mechanical modification or adjustment of the
gimbal is required or recommended. DO NOT add any other component or device to the
camera such as a filter or lens hood.
2. Only use the L2 with specified compatible DJI
aircraft and the remote controller are the latest versions.
3. DO NOT expose the LiDAR to strong sources of energy such as a laser beam or any other
LiDAR in use. Otherwise, the LiDAR may be permanently damaged.
4. Be careful when using the L2 in conditions with low visibility such as foggy or stormy weather
as the detection range may be reduced.
5. DO NOT touch the optical window of the L2. Dust and stains on the optical window can
negatively affect the performance. Use compressed air, isopropyl alcohol, or a lens cloth to
clean the optical window correctly. Refer to the L2 User Manual for more information on how
to clean optical windows. DO NOT use substances containing alcohol, benzene, thinners, or
other flammable substances to clean or maintain the RGB mapping camera.
6. DO NOT drop the L2. Calibrate the L2 using DJI TERRA
or the output is layered.
Introduction
The Zenmuse L2 integrates a LiDAR module, a high-accuracy IMU, and an RGB mapping camera
on a 3-axis stabilized gimbal, which can be used with specified compatible DJI aircraft. With
Point Cloud LiveView, users can take a quick view of the 3D point cloud effect in the DJI PILOT
2 app. When used with DJI Terra, the L2 offers a complete solution that generates point cloud
output and extracts ground points to generate DEM results, which efficiently completes highly
accurate reconstructed models of complex structures.
TM
aircraft. Make sure the firmware of the
TM
if the point cloud data is inaccurate
TM
5
Werbung
