Troubleshooting; Maintaining The Device - Walimex Pro Soft LED Round Gebrauchsanleitung

11. Troubleshooting

Problem
The device is switched
on, but does not show
any function.
The illuminant does
not light

12. Maintaining the device

WARNING
Danger of electric shock and danger of fire due to short circuit.
Have the device repaired by an electrician immediately.
WARNING
Danger of cutting and splintering caused by breaking or bursting illuminants.
34
Possible cause
Mains cable not plugged in
or not plugged in correctly.
Power packs are almost
exhausted
The device is switched off
The device has not enough
power
The device is defective
Remedy
Plug the mains cable in
correctly
Charge the power packs
Switch on the device
Increase the power of
the dimmer control
Repairs must only be
carried out by a skilled
electrician