Silvercrest SHBS 500 E4 Bedienungsanleitung Seite 23

6) Guide the nose of the shaving head
housing. Press the shaving head
tip it forward until it audibly engages in the appliance (see fig. 10).
Fig. 10
Storage
♦ Store the appliance in a dust-free and dry location.
♦ When storing the appliance, fit one of the comb attachments
to the shaving head
Troubleshooting
The following table will help you locate and correct any problems:
Fault
The appliance
will not switch
on.
│
■ 20 GB│IE
1
1
to protect the cutting blade.
Possible cause
The battery is empty.
1
under the rear edge of the
down into the notch and then
Remedy
Connect the appliance
to a mains power socket
(see section Charging the
appliance).
0/q
SHBS 500 E4