Silvercrest SHBS 500 E4 Bedienungsanleitung Seite 22

Cleaning the shaving head and oiling the cut-
ting blade
Note
► The cutting blade of the shaving head
water. Do not use any other liquids.
► Only use acid-free precision engineering oil, such as sewing ma-
chine oil, to oil the cutting blade.
1) First press the shaving head
your thumb (see fig. 8). Then pull the shaving head
out of the appliance (see fig. 9).
Fig. 8
2) Remove hair residue from the shaving head
e
brush (supplied).
3) Clean the shaving head
other liquids for cleaning.
4) Allow the shaving head
5) Add a few drops of the supplied blade oil
of the shaving head
access oil with a soft cloth.
SHBS 500 E4
1
forwards off the appliance with
1
under running water. Do not use any
1
to dry.
1
and distribute it evenly. Wipe off any
1
can be cleaned with
1
Fig. 9
1
with the cleaning
w
to the cutting blade
upwards
│
GB│IE
19 ■