Bosch GLL 2-10 G Professional Originalbetriebsanleitung Seite 226

30 | English
able as a reflector. Correct results are achieved only when the right angles required for
the respective measurement are exactly adhered to (Pythagorean Theorem).
For simple Pythagoras measurements, repeatedly press button (4) [Func] until the in-
dicator for single Pythagoras measurement
Make sure that there is a right angle between the sought distance (height) and the hori-
zontal distance (depth)! Then measure the depth and diagonal one after the other as
with a length measurement. The laser beam remains switched on between the two meas-
urements. The distance to be measured flashes in the indicator for simple Pythagoras
measurement .
The first measured value is shown at the top of the display.
After the second measurement has been completed, the height will
be automatically calculated and displayed. The end result is shown at
the bottom of the display, while the individual measured values are
shown above it.
Deleting measured values
Briefly pressing the on/off button (5) [ ] will delete the last measured value in all meas-
uring functions. Repeatedly pressing the on/off button (5) [ ] briefly will delete the
measured values in reverse order.
Memory functions
Memory value display
Maximum 10 values (measured values or end results) can be retrieved.
To display memory values, repeatedly press button (4) [Func ]until the symbol ap-
pears on the display (1).
The number of the memory value is shown at the top of the display,
the corresponding memory value is shown at the bottom, and the cor-
responding measuring function is shown on the left.
Press the [+] button (6) to browse forwards through the saved val-
ues.
Press the [–] button (3) to browse backwards through the saved values.
If there is no value available in the memory, "0.000" is shown at the bottom of the dis-
play and "0" at the top.
The oldest value is located in position 1 in the memory, while the newest value is in posi-
tion 10 (when 10 memory values are available). If a further value is saved, the oldest
value in the memory is always deleted.
1 609 92A 7L2 | (26.04.2022)
appears on the display (1).
Bosch Power Tools