K-FEE LATTENSIA Betriebsanleitung Seite 50

Startup (continued)
EN
Risk of scalding!
Very hot steam and
hot water.
When the machine is
ready, all buttons light
up white - except the
On/Off button.
When the machine
is switched on, the
rotary switch must be
set to "drink dispensing". If
this is not the case, the rinse
button will very quickly start to
flash red.
50
9 10
Wait until rinsing pro- Place a container under
cess has finished. Then the milk foaming unit.
empty the container.
13
12
Turn the rotary switch
Wait until the milk
to milk frothing. The container is empty.
rinsing process starts.
11
Immerse the end of Optional: fill milk
the suction hose into a container with approx.
second container with 250 ml of cold water
approx. 250 ml of cold and connect to milk
water. foaming unit.
14
15
Turn the rotary switch The appliance is ready
back to drink dispens- for operation.
ing. Empty the full
container.