Mennekes AMTRON Start Betriebs Und Installationsanleitung Seite 37

2.4.4 Observing ambient conditions
If the permissible ambient conditions are not adhered
to, the functionality and operational safety of the device
is affected. This can cause accidents and severe inju-
ries to people. Observe the following environmental
conditions:
f Keep the device away from explosive and highly
flammable substances.
f Avoid direct sunlight. If necessary, install the weather
protection cover.
f Keep the ambient temperature from -25 to +40 °C.
f Avoid penetration of water.
f Avoid strong temperature fluctuations.
f Ensure adequate ventilation of the device and avoid
heat accumulation.
f Keep device away from heat sources.
2.4.5 Proper use of charging cable
Improper handling of the charging cable can cause haz-
ards such as electric shock, short circuit or fire.
f Do not touch the contact pins.
f Do not use adaptor connectors or extension cables.
f Avoid kinks, sharp edges, loads and impacts.
f Avoid accumulation / knotting of the charging cable.
f Unroll the charging cable completely when charging.
f Remove the charging cable only by pulling the plug
from the charging socket.
f Keep small animals away from the charging cable.
Use protective flap.
f Do not expose the charging cable to tensile stress.
2.4.6 Keeping order
A charging cable lying around presents a stumbling
hazard.
Objects on the device may fall.
f Minimise stumbling hazard.
f After charging store the charging cable properly or
use the cable suspension.
f Do not store any objects on the device.
3. Product description
The devices may differ due to customer or country-specific
requirements. Depending on the model, the device may
differ visually from the illustrations in this guide.
3.1 Scope of delivery
Fig.: 1. Scope of delivery
1. Device
2. Key set for authorization
3. Allen key
4. Bag with installation hardware
(screws, dowels, sealing plugs)
5. Operating and installation manual
6. Drilling jig
1)
Optional
Î "3.4 Optional equipment"
The keys can be reordered from the following address
quoting the code number on the key and lock:
Günter Ernsthäuser Sicherheitstechnik GmbH
Walsroder Straße 26
30851 Langenhagen
Phone: +49 (0) 511 74303030
Email: info@ernsthaeuser.de
1)
EN
5