Description Of The Device; Devices; Exvoid / Exvoid Hc; Exdirt / Exdirt Hc - Reflex Exvoid Betriebsanleitung

2

Description of the device

Note!
In general standard separators are used for flow velocities up to 1.5 m/s. In general the HiCap (HC) model is used with flow
velocities of 1.5 to 3.0 m/s.
2.1

Devices

2.1.1

Exvoid / Exvoid HC

A gas/air separator with micro bubble separation removing circulating free air and gas bubbles.
The device is available in the following variants:
No. Variant
1 Welded connection
2 Flange connection
2.1.2

Exdirt / Exdirt HC

A dirt/sludge separator removing circulating free dirt and sludge particles.
The device is available in the following variants:
No. Variant
1 Welded connection
2 Flange connection
1 + 3 Welded connection and service flange
2 + 3 Flange connection and service flange
2.1.3

Extwin / Extwin HC

A combined dirt/sludge separator and gas/air separator removing circulating free air and gas bubbles and free dirt and sludge particles.
The device is available in the following variants:
No. Variant
1 Welded connection
2 Flange connection
1 + 3 Welded connection and service flange
2 + 3 Flange connection and service flange
2.2

Optional equipment

2.2.1

Sludge separator

The devices can be expanded with the following accessories:
• Magnet insert Exferro
Reflex ex separator — 21.11.2016
Description of the device
English — 19