Wolf Gourmet WGSM300 Gebrauchs- Und Pflegeanleitung Seite 8

Attaching the Food Grinder Attachment to the Stand Mixer
Before inserting or removing attachments, always make sure stand mixer is
1.
unplugged and setting control is set to OFF ( ).
Remove the magnetic accessory cover on the Wolf
2.
Gourmet Stand Mixer to access the attachment hub.
Insert the gear end of the housing at an angle, aligning the
3.
tabs with the hub of the speciality attachment area. Turn
the housing counter clockwise until it locks into place.
Insert the notched tray opening into the slot at the top of
4.
the housing.
Grinding with the Food Grinder Attachment
WARNING
Entanglement hazard.
•
•
•
•
Cut food into pieces sized to fit into the opening of the tray.
1.
Turn speed control to desired speed between 1-4 and feed
2.
food through the tray opening using the food pusher.
Removing Food Grinder Attachment
Turn off and unplug the stand mixer. Remove tray.
1.
Press the accessory lock release button and turn the housing clockwise to
2.
remove from the stand mixer.
Hold the housing, turning the collar counterclockwise to remove.
3.
Carefully remove disc, blade, and grinding auger to clean.
4.
8
Never reach into grinder outlet.
Always use food pusher.
Do not operate without tray in place.
Read instructions before using.