Conditions On Site; Protection Against Corrosion; Deposits - Hbm Pwse Montageanleitung

8
2

Conditions on site

The PWSE series load cells reach the protection class IP67.

2.1 Protection against corrosion

The load cells must be protected against chemicals that could attack the
transducer body (stainless) steel or the cable.
NOTE
Acids and all substances that release ions also attack stainless steels and
their welded seams.
Should there be any corrosion, this could cause the transducer to fail. In this
case, appropriate protective measures should be implemented.

2.2 Deposits

Dust, dirt and other foreign matter must not be allowed to accumulate suffi­
ciently to divert some of the measuring force onto the housing, thus invalidat­
ing the measured value (force shunt).
HBM
PWSE
A3361-1.0 en/de/fr