Markings Used; Symbols On The Load Cell; The Markings Used In This Document - HBM PWSE Montageanleitung

PWSE
1

Markings used

1.1 Symbols on the load cell

Symbol:
Meaning: CE mark
The CE mark enables the manufacturer to guarantee that the product com­
plies with the requirements of the relevant EC directives (the Declaration of
Conformity can be found on the HBM website at
Support -> HBMdoc).

1.2 The markings used in this document

The marking below warns of a potentially dangerous situation in which failure
to comply with safety requirements can result in death or serious physical
injury.
WARNING
Description of a potentially dangerous situation
Measures to avoid/prevent the danger
The marking below warns of a situation in which failure to comply with safety
requirements could lead to damage to property.
NOTE
Description of a situation that could lead to damage to property
The marking below draws your attention to important information about the
product or about handling the product.
Important
Important information
A3361-1.0 en/de/fr
www.hbm.com under
7
HBM