Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4 Operation
4.3 Roller cleaning mode operation method:
1. After the floor cleaning, please turn off the device and park it in the charging stand.
2. The roll cleaning icon starts to flash on the product information display.
3. Press the roller cleaning button on the handle (3) for a second or two to start the roller cleaning program.
4. When the roller cleaning process is finished, the red water discharge icon will appear on the information display.
5. Empty the dirty water tank and clean the filter coming out of the tank.
6. After emptying the dirty water tank and filling the clean water tank, the red icon on the screen will turn off.
7. The blue charging information icon on the information screen will continue to light.
C
If you want to repeat the roller cleaning process, repeat steps 4.3 in the manual. Before repeating
these steps, ensure the dirty water tank is empty and the clean water tank is full.
C
If the product is taken from the charging stand during the roll cleaning step, or if the charging stand
adapter is unplugged or the power is cut off, the roll cleaning step will end within 15-20 seconds.
C
When plugged back in the following days, if the product is in the storage station, the self-cleaning light
will flash, and the process can begin with the steps above.
4.4 Cleaning the dirty water tank
Step 1:
Press the dirty water tank latch to
remove the dirty water tank.
Step 2:
Remove the dirty water tank by
pulling up the hepa filter cassette
and the dirty water tank float.
3-in-1 Cordless Vacuum Cleaner / User Manual
Empty and clean the dirty water
tank after each use. If not using
it long, dry the dirty water tank to
prevent foul odour.
Step 3:
Open the cover on the dirty water
tank float. Large dust and dirt
particles in the dirty water tank
accumulate here. Clean it and
place it in the dirty water tank.
35 / EN
Werbung
