Grundig VCW 7230 Bedienungsanleitung Seite 32

3 Installation
3.3 Roller brush cover mounting
Removal:
Press the unlock button on the top
cover of the floor brush with your
finger and pull up to remove the top
cover of the floor brush.
3.4 Roller brush cover removal and mounting
Removal:
Unlock the roller brush by pressing
the left button and pulling the roller
brush upwards.
C
When using the brush on the carpet, turning off the water spray function is recommended.
32 / EN
Installation:
Fit the top cover tabs into the
grooves in front of the roller
brush and press the cover firmly.
Installation is complete when a
"click" is heard.
Installation:
Place the roller brush on the right
wheel axle and press the roller
brush down. The roller brush unlock
button is equipped with a push
button for positioning, and assembly
is complete when a "click" is heard.
3-in-1 Cordless Vacuum Cleaner / User Manual