Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2 Overview
2.3.1 Floor Surface Cleaning
The product is equipped with a clean water tank, dirty water tank, floor cleaning roller brush, motors and other
functional modules. Water is pumped into the floor-cleaning roller brush, and the floor-cleaning motor makes it spin
at high speed to clean surfaces. After cleaning the floor, the dirty water is sucked by the suction motor and drawn
back into the dirty water tank. During the floor cleaning process, the level of spraying water on the cleaning roller
brush can be adjusted or cancelled.
2.4 Product Introduction
• "MODE" Roller Brush Water Level and Motor Speed Adjustment Button: When the Floor Cleaning Machine
is turned on with the on/off button, the Floor cleaning roller brush water level and motor suction speed work in
the Minimum Position. This appears on the information display.
• When the MODE button is pressed again while the product is operating in minimum mode, The floor cleaning roller
brush level and the motor suction level rise to the Maximum position. This appears on the information display.
When MODE key is pressed again in Maximum position; The roller water spray level on the information screen
disappears. The Water spray is cancelled. When you cancel the water spray function of the roller brush, It is used
to extract liquid from the wet floor, sweep the damp floor by mopping and sweep the carpet floors.
• "
" Handle On/Off Button: (2) When you press the handle on/off button, the product starts to operate at
minimum engine speed and water spraying.
• While the product is running (2), if you press the handle on-off button again, the product turns off by operating
at high speed for about 3 seconds.
• "
" Floor Cleaning Roller cleaning button: as soon as the cleaning process is completed and you park
the product on the charging stand and start charging, the floor cleaning roller icon starts to flash on the display.
(Before pressing the floor cleaning button on the handle (3), empty the dirty water tank and check that the clean
water tank is full.) Press the floor cleaning roller button and start the roller cleaning process. After the cleaning
is completed, the product will stop by itself, the red light will illuminate the display, and the icon will come on,
reminding you to empty the dirty water tank and fill it. This red icon will turn off when you empty the dirty water
tank and fill the clean water tank.
30 / EN
3-in-1 Cordless Vacuum Cleaner / User Manual
Werbung
