Grundig VCW 7230 Bedienungsanleitung Seite 34

4 Operation
WARNING! The Product will not operate when the on / off
A
switch on the rear body is not turned on. Ensure this switch is
on when your product is not operated from the handle.
WARNING! Do not tilt the device entirely while water is in the
A
dirty tank during use. Otherwise, water may leak from the brush
section.
C
Please ensure the clean water tank is full and the dirty container is empty so the roller brush
can clean itself.
4.2 Roller brush cleaning
As soon as the cleaning process is completed and the product is parked on the charging stand, and charging starts,
the floor cleaning roller icon starts to flash on the display.
(Before pressing the floor cleaning button on the handle (3), check that the dirty water tank is empty and the clean
water tank is full.)
Press the floor cleaning roller button on the handle and start the roller cleaning process. After the cleaning, the prod-
uct will stop by itself, the red light will flash on the screen, and the icon will be activated, reminding that the dirty
water tank should be emptied and the clean water tank should be filled.
This red icon will turn off when you empty the dirty water tank and fill the clean water tank.
C
When the roller brush cleaning process is finished, removing the floor cleaning roller and drying it in a
ventilated place is recommended. Drying the roller brush prevents the formation of odour on the brush.
34 / EN
3-in-1 Cordless Vacuum Cleaner / User Manual