Hach REFO 60 Bedienungsanleitung Seite 6

User Manual REFO 60 / REFO 60-D
C Technical Information
C1 Service
Your REFO 60 will benefit from occasional care and attention. The outer casing can be
cleaned using a dry cloth or mild household cleaner. Solvents such as benzene, acetone
or similar substances must NOT be used. For maintenance of the calibration standard,
refer to chapter B.3.2. Cleaning of the optical parts should be carried out by our customer
service.
C2 Service and Addresses
For further information please contact your local service agent or the Hach subsidiaries.
C3 Fact Sheet
Display
Measuring principle
Calibration standard
Viewing geometry
Dimensions
Power
Weight
C4 Accessories and Spare Parts
Part
Standard A
Metal standard (only REFO 60-D)
Alkaline batteries type AA, 2pcs.
4
digital, 4-digit dot matrix, LCD-display
single-beam principle acc. to DIN 67530
certifiable and retraceable DIN- or metal standard
60°
140 x 40 x 80mm L/W/H , measured area 17 x 9mm
batteries, 2 x type alkaline LR6, AA Mignon
430g
order no.:
LZM 150
LZM 154
LZM 195