Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Toro Tempus Air CT
FAQ
What are the features required for the Bluetooth® product to work?
Android 4.3 (or more) Smartphones or tablets equipped with Bluetooth Smart 4.0 (or more). iOS 9.0 Apple
iPhone or iPad running (or more) with Bluetooth Smart 4.0 (or more)
What is output P for?
You can connect a master valve or a pump through a relay, on P output. It will start automatically during each
station watering.
What are the controller's output S (blue wire) for?
You can plug a rain sensor into S outputs, to do that you need to cut the blue wire.
How does the rain sensor work?
When connected to the wire the rain sensor acts on the stations. If it is raining, stations won't start; you must
wait the probe to dry before the programming star again. The manual control is not affected by the rain sensor
conditions.
How can I restart the pairing or the pairing procedure?
To start the pairing procedure again, just bypass the 2 battery connector pins (battery removed) for 30s
minimum
If my device has no more battery, do I lose my programming?
No, they are not lost, it is automatically saved.
GENERAL INFORMATION
This symbol indicates that the product uses a LoRa
The symbol «CE» indicates that this device complies with the European standards on safety,
health, environment and user protection. Devices with the symbol «CE» are intended for sale in
Europe.
This symbol indicates that these types of electrical and electronic equipment must be disposed of
separately in European countries. Do not dispose of this device with your household waste.
Please use the collection and recycling points available in your Country when you no longer need
this device.
Tempus Air Controller CT
1-2-4-6 Stations
For Technical Assistance:
service.wb.emea@toro.com
6
technology radio.
TM
© 2021
The Toro Company
Werbung
