Pkm KS 81.0 Bedienungsanleitung Seite 107

NOTICE! Do not tilt the appliance more than 45
➢ Empty the appliance.
➢ If possible, remove all door trays, glass shelves and
drawers from the fridge so that they cannot be damaged.
➢ It is necessary to tilt the appliance backwards while
removing the doors. Lean the appliance against a solid and
immovable surface so it will not slip while changing the
hinge positions.
➢ Do not lay the unit flat as this can damage the cooling
system.
➢ All parts removed must be saved for proper reinstallation
of the doors.
➢ Always remove the door(s) carefully. Keep the door(s) in
a safe place so that they cannot be damaged.
H
OW TO CHANGE THE HINGE POSITION
1. Disconnect the appliance from the power supply (unplug).
2. Slightly tilt the appliance back and secure it in this
position. Do not tilt the appliance more than 45
3. Remove the left screw hole cover (B) on the top of the
appliance (A); s. fig. below.
4. Remove the right hinge cover (C) on the top of the
appliance (A); s. fig below.
P
REPARATORY MEASURES
107
0
.
:
:
0 !