ECOVACS DEEBOT X2 OMNI Bedienungsanleitung Seite 35

No. Malfunction
AIVI Camera cannot recognize
13
objects.
After returning to the Station,
14 DEEBOT does not empty the
Dust Bin.
15 Fail to empty the Dust Bin.
The inner side of Dust Collection
16
Cabin is dirty.
Dust leakage occurs during
17
working.
Possible Causes
The cleaning area is not well illuminated.
AIVI Camera lens is dirty or blocked.
The Auto-Empty function has not been turned on in
the ECOVACS HOME App.
Dust Bag is not installed in the Station.
Manually moving DEEBOT back to the Station might
not trigger Auto-Empty function.
DEEBOT automatically returns to the Station in
Video Manager mode.
In Do Not Disturb mode, DEEBOT will not empty the
dust after returning back to the Station.
The Station detects a decrease in empty efficiency.
If the above possible causes have been ruled out,
components of the Station may be abnormal.
The Station detects a decrease in empty efficiency.
The outlet of Dust Bin is blocked by foreign objects.
Fine particles are absorbed in the inner side of Dust
Collection Cabin through the Dust Bag.
The Dust Bag is broken.
The outlet of Dust Bin is blocked by foreign objects.
Solutions
Smart Recognition requires sufficient lighting. Please
make sure the areas to be cleaned are well illuminated.
Clean the lens with a clean soft cloth, and make sure
the sensor is not blocked. Avoid using any detergent or
cleaning spray while cleaning.
Turn on the Auto-Empty function in the ECOVACS HOME App.
Install the Dust Bag, and close the Dust Collection Cabin .
It is recommended to let DEEBOT return to the Station on its own.
Please do not manually move it.
DEEBOT doesn't do cleaning task and empty the Dust Bin in Video
Manager mode. This is a normal phenomenon, please rest assured to
use.
Turn off Do Not Disturb mode in ECOVACS HOME App or manually
start dust-emptying.
Replace the Dust Bag according to the
close the Dust Collection Cabin. If the Dust Bag is not full when
ECOVACS HOME App prompts, you can put it back again.
Please contact Customer Care for help.
Replace the Dust Bag according to the
close the Dust Collection Cabin. If the Dust Bag is not full when
ECOVACS HOME App prompts, you can put it back again.
Remove the Dust Bin and clean the foreign objects on the outlet.
Clean the inner side of Dust Collection Cabin.
Check the Dust Bag. Replace it.
Remove the Dust Bin and clean the foreign objects on the outlet.
[Maintenance] section and
[Maintenance] section and
35 EN