uebler X21S Montage- Und Bedienungsanleitung Seite 19

Removing bicycles
Bicycles are removed and brackets (2), (3) and (4) released in
reverse order.
Adjusting lighting
B 9
5
If the vehicle or the load of the bicycle rack protrude at the
side more than 40 cm over the outer edge of the tail lights (9)
(distance B), move the tail lights (9) outwards.
9
1. Squeeze the locking mechanism (26), move the tail lights (9)
to the outer position and release the locking mechanism (26).
2. Check that the tail lights (9) sit firmly.
3. Prior to collapsing the bicycle rack (1), return the tail lights (9)
to the starting position in the reverse order.
5. without wing mirror
9 B
M+P-25A-0123
26
1
M+P-25A-0124
- 17 -
Tilting/collapsing the bicycle rack
Attention
Slowly tilt the bicycle rack back while ensuring that no persons
or objects are located in the tilting area.
There is a danger of crushing for people and objects in the
tilting area.
Ensure that the bicycle rack fully engages with both hooks and
locks when folded back. Otherwise, the bicycle rack could tilt
back during a trip and result in injury to you or others and/or in
property damage
Tilting the bicycle rack back
The bicycle rack can be tilted back for loading and unloading
the vehicle.
27
Activate the foot lever (27) and tilt the bicycle rack (1) back by
pulling on the rack (7) or the bicycle frame.
Folding back the bicycle rack
1
1. Fold back the bicycle rack (1) so that both hooks (28) are fully
engaged and located in the frame (29).
2. Jiggle the bicycle rack (1) to ensure it is seated firmly.
If necessary, tilt back the bicycle rack (1) again and fold back
a second time.
7
1
M+P-25A-0125
28
29
28
29
M+P-25A-0126