AEG MW 5 Originalbetriebsanleitung Seite 22

22 www.aeg-automotive.com
PRODUCT
OVERVIEW
2
3
4
5
POWER
CHARGE
6
FAULT1
FAULT2
7
1
1. Mains plug
2. Power cable
3. Charger
4. „Power" LED
5. „Charge" LED
6. „Fault 1" LED
7. „Fault 2" LED
8. Charging cable
9. Charging coupler, vehicle side
10. Protective cap
11. Carrying bag
11
OPERATION
DaNGER!
Touching electrical wires can result in fatal electric
shock.
10
•
Do not touch the connection by the charging
cable or the contacts, only the charging coupler.
•
When charging has completed, always attach the
9
protective cover to the charging coupler.
WaRNING!
Before using this device be sure to read the operat-
ing manual for the battery and the vehicle and
understand all safety notices.
8
Before use
•
Check the device and cables for damage before
every use! Do not use the device if damaged!
•
Never use the device to charge if the charging
connector is not securely plugged into the charg-
ing socket!
•
Observe the charging information in the operat-
ing instructions of your vehicle.
Start charging
1. Plug the mains plug (1) into a 230 V mains
socket.
The „Power" LED (4) will light up.
2. Open the cover to your charging socket on your
vehicle.
3. Remove the protective cover (10) from the
charging coupler (9) on the vehicle.