Herunterladen Diese Seite drucken

EuroLite LED WF-30 Wassereffekt Bedienungsanleitung Seite 26

Led-projektionseffekt für wasserspiegelungen, rgb-farbmischungen & dmx

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

000 – 009 No function
010 – 019 Auto program 1
020 – 029 Auto program 2
030 – 039 Auto program 3
040 – 049 Auto program 4
050 – 059 Auto program 5
060 – 069 Auto program 6
070 – 079 Auto program 7
080 – 089 Auto program 8
090 – 099 Auto program 9
100 – 109 Auto program 10
110 – 119 Auto program 11
8
120 – 129 Sound program 1
Auto- and Sound
130 – 139 Sound program 2
Program
140 – 149 Sound program 3
150 – 159 Sound program 4
160 – 169 Sound program 5
170 – 179 Sound program 6
180 – 189 Sound program 7
190 – 199 Sound program 8
200 – 209 Sound program 9
210 – 219 Sound program 10
220 – 255 Sound program 11
9
Speed
000 – 255 Auto- and Sound Program with increasing speed
Auto- and Sound
Program
CLEANING AND MAINTENANCE
The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The
lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.
1
Disconnect the device from power and allow it to cool before cleaning.
2
Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3
The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
1
Disconnect the device from power and allow it to cool.
2
Open the fuse holder of the mains connection with a fitting screwdriver.
3
Remove the old fuse from the fuse holder and replace it with a new fuse.
4
Carefully push the fuse holder back into its position before reapplying power.
26/28
00123661, Version 1.0

Werbung

loading

Diese Anleitung auch für:

51918545