EuroLite LED WF-30 Wassereffekt Bedienungsanleitung Seite 21

Connection to the mains
The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.
1 Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.
2 To switch off the unit, disconnect the power plug.
3 Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains
outlet which is switchable.
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any
commercial DMX controller.
Menu structure
Mode
DMX channel
Preset colors
Automatic mode
Sound control
Running speed in
automatic mode and
sound control
Microphone sensitivity
for sound control
Individual color mix
Dimmer
Color fade
Sound control silent
scene
Direction adjustment
Slave mode
IR remote control
Display
9CH
Addr
6CH
Stat S 01-18
Auto Au 1–11
Soun So 1–11
SPEE SP 1-9
SEnS SE 1-9
r000-255
Colo
g000-255
b000-255
diMM dI 1-dI 9
Fade on/off
on
SILE
oFF
Pro
dlrE CLo
Ant
SLAU SLAU
on
InFr
oFF
21/28
d001-512 9-channel mode and start address
d001-512 6-channel mode and start address
Constant lighting in one of 18 colors
Auto program
Sound program
Program running speed
slow > fast
Microphone sensitivity
low > high
Red 0-100%
Green 0-100%
Blue 0-100%
Total brightness (Stat, Auto, Soun,
and Colo modes)
dark > bright
Fade function in Auto and Sound
programs
LEDs off if there is no music signal
LEDs remain on if there is no music
signal
Motor random rotation
Motor clockwise rotation
Motor anti-clockwise rotation
Slave mode
IR remote control on
IR remote control off
Function
00123661, Version 1.0