Hilti VC 40-U Original Bedienungsanleitung Seite 31

7.1 Hose diameter setting
(VC 20‑UM/ VC 40‑UM)
When picking up dry, non flammable dust
which has an exposure limit value, or when
picking up wood dust, adjust the hose dia-
meter setting switch to the correct diameter
setting for the suction hose used.
See section: 2.2 Hose diameter settings
(VC 20‑UM/ VC 40‑UM)
7.2 Operation without use of the electric
tool power outlet
NOTE
Check that the appliance is switched off before
plugging it into the power outlet (control switch
in the "OFF" position).
1. Plug the supply cord into the power outlet.
2. Turn the control switch to the "ON" posi-
tion.
7.3 Operation with use of the electric tool
power outlet
DANGER
The power outlet is to be used only to connect
electric tools directly to the vacuum cleaner.
NOTE
Check that the electric tool is switched off
before plugging it into the power outlet on the
vacuum cleaner.
NOTE
The operating instructions and safety instruc-
tions for the electric tool plugged into the power
outlet on the vacuum cleaner must be ob-
served.
NOTE
Check to ensure that the maximum power
drawn by the electric tool is below the max-
imum permissible output of the power outlet on
the vacuum cleaner (please refer to the "Tech-
nical data" section of the operating instructions
and information printed on the power outlet).
1. Disconnect the power tool supply cord
plug from the power outlet.
2. Plug the electric tool's supply cord into the
power outlet on the vacuum cleaner.
3. Plug the vacuum cleaner's supply cord into
the power outlet.
4. Turn the control switch to the "AUTO" po-
sition.
5. Switch on the electric tool.
NOTE The vacuum cleaner will continue to
run for a short time after switching off the
electric tool in order to ensure that all dust
is removed from the suction hose.
7.4 Picking up dry dust
NOTE
Before using the appliance to pick up dry dust,
especially dust from mineral materials, always
check to ensure that the correct dust bag (Hilti
accessory) is fitted in the container. The ma-
terial collected can then be disposed of cleanly
and easily.
CAUTION
The material collected must be disposed of
in accordance with the applicable regula-
tions.
CAUTION
Never use the appliance without a filter ele-
ment.
CAUTION
When fitting the top section of the vacuum
cleaner, take care to avoid pinching your
fingers or damaging the supply cord.
Check to ensure that the filter element is dry.
A damp filter element will quickly become
clogged when dry dust is picked up with the
appliance. Accordingly, before being used for
picking up dry dust, the filter element should
be rinsed and allowed to dry or replaced with
another dry filter element.
7.4.1 Changing the paper dust bag / filter
fleece
DANGER
Check that the bag has not been pierced
through by objects which may cause injury.
CAUTION
The material collected must be disposed of
in accordance with the applicable regula-
tions.
en
31