Connecting The Components - Megasat Caravanman Kompakt Bedienungsanleitung

2. Installation

2.4 Connecting the components

Plus ignition
The Caravanman compact automatically moves to the retracted position when the igni-
tion key is turned. This function is only available when the controller is switched on and
4 5
cables and
control unit of the satellites in succession.
(+) (-)
4
5
4
3
(-) (+)
Power supply:
12V DC via battery (positive-perma-
nent systems) or optional DC power
supply 230V/12V (no charger). Ensu-
re that a current is assured of at least
5 amps.
Note:
During the registration process no
charger should be connected to the
car battery!
1
Coax cable 10 m
2
Coax cable 1 m
3
Positive pole
4
Negative pole
5
Plus ignition
08
connected. Once the antenna is retracted, the LEDs light up on the
F-connector WITHOUT
marking
1
Control unit
2
Set-top box
TV
Warning:
Connect the device only at a 7 amp
protected line. The line must be at least
2.5 mm² strong. (never directly to the car
battery).
ENGLISH
F-connector WITH
marking
Second connection
only Caravanman
compact Twin
not in
Included!
Set-top box
TV