Firmware Update - Megasat Caravanman Kompakt Bedienungsanleitung

10. Firmware Update

From time to time it happens that the firmware of the controller needs to be updated
(eg. change a frequency of the satellite operator or general improvement of the control
unit). You can find the latest firmware from our homepage www.megasat.tv
Update procedure
1. Copy the firmware file to an appropriate USB
stick. The USB flash drive should be formatted in
FAT32 and do not include other files.
2. Make sure that the control unit is turned off at
the main switch.
3. Insert the USB flash drive with the new firmware
into the USB socket on the front.
4. Now switch on the control unit. The control unit
boots and starts the update process automati-
cally. IMPORTANT: Do not turn off the con-
trol unit during the update procedure in
order to avoid any damage!
5. After a successful update, the control unit swit-
ches off and restarts automatically. The update
process is now complete. The current firmware
is displayed shortly after the boot process on
the display.
16
ENGLISH