Renkforce 1404214 Bedienungsanleitung Seite 31

• After completion of the station scan, the first station in alphanumeric order is played back.
If no stations are found, no signal could be received. In this case, move the device or align
the telescopic aerial (18) differently, and perform the station scan again.
Setting the volume
• Turn the VOLUME controller (15) to set the volume.
Direction + >> Volume is increased
Direction - >> Volume is reduced
Selection of the operating mode DAB/FM
• Push the button FM/DAB (9) to switch between DAB and FM operation.
Switching Off
• Push the button ON/OFF (14) to switch the device off again.
• The display (13) goes out.
In spite of the deactivated condition, the device is connected to the mains when supplied
via the mains unit.
Connection of Headphones
• If required, plug the connection plug of your headphones into the headphones socket (16).
• Once headphones are connected, playback takes place via the headphones and the integrated
speaker is switched off.
Selecting the menu language
• Push the button MENU (5).
• Use the TUNING (12) buttons to select "Language".
• Push the button ENTER (11).
• Use the TUNING (12) buttons to select the desired menu language.
• Push the button ENTER (11) to confirm.
31