Miele DOS K 85 flex Montageanweisung Seite 19

Connect the module to the machine's power supply.

Connections for the dispensing hoses are located on the back of the
cleaning machine.
These are described in detail in the operating instructions for your
cleaning machine.
Fill or replace the container, fit the siphon and secure the lid.

Feed the siphon into the canister until it reaches the bottom.

Follow the instructions for venting the dispensing system and set-
ting the dosage in the operating instructions.
Colour coding on the dispensing hoses
To differentiate between the containers when using more than one
DOS module, the hoses must be colour coded using the coloured la-
bels supplied.
Stick the label near the siphon and one of the same colour close to

the free end of the hose to enable clear identification.
Miele use and recommend the following for DOS K 85:
- blue: for cleaning agent
- red: for neutralising agent
- green: for disinfecting agent / additional second cleaning agent
- white: for acidic chemical agent
- yellow: for special agents in laboratory applications
Maintenance
Maintenance of the dispensing system can be performed by Miele
Customer Service at the same time as maintenance of the cleaning
machine.
en - Connection
19