Werbung
Verfügbare Sprachen
Verfügbare Sprachen
●
before checking, cleaning, and working
on the product
●
before changing accessories
●
whenever performing maintenance
■
Immediately turn off the product and remove
the battery pack in the event of accident
or breakdown. Never operate the product
again until it has been fully checked by an
authorised service centre.
■
To avoid injury, do not stare at the UV LED
light.
ADDITIONAL BATTERY SAFETY
WARNINGS
To reduce the risk of fi re, personal injury,
and product damage due to a short circuit,
never immerse the product, battery pack, or
charger in fl uid or allow fl uid to fl ow inside
them. Corrosive or conductive fl uids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can
cause a short circuit.
TRANSPORTATION AND STORAGE
■
Turn off the product, remove the battery
pack, and allow both to cool down before
storing or transporting.
■
Remove all foreign materials from the
product.
■
Do not store or transport the product with
the battery pack fitted. Remove the battery
pack, and secure it separately. Store the
product in a cool, dry, and well-ventilated
place that is inaccessible to children. Keep
the product away from corrosive agents,
such as garden chemicals and de-icing
salts. Do not store the product outdoors.
■
For transportation in vehicles, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
TRANSPORTING LITHIUM BATTERIES
Follow all special requirements on packaging
and labelling when transporting batteries
by a third party. Ensure that no batteries
can come in contact with other batteries or
4
Original Instructions
conductive materials while in transport by
protecting exposed connectors with insulating,
nonconductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further advice.
MAINTENANCE
■
Use
only
original
replacement
parts,
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
■
Servicing
requires
knowledge and should be performed only
by a qualified service technician. Have the
product serviced by an authorised service
centre only.
■
Turn off the product and remove the battery
back before conducting any maintenance or
cleaning work.
■
You may make adjustments and repairs
described in this manual. For other repairs,
contact an authorised service centre.
■
After each use, clean the product with a soft,
dry cloth and clean the grid with the brush
included with the product. Any part that is
damaged should be properly repaired or
replaced by an authorised service centre.
■
Check all nuts, bolts, and screws before
each use and at frequent intervals for
proper tightness to ensure that the product
is in safe working condition. Any part that
is damaged should be properly repaired or
replaced by an authorised service centre.
■
Bring the product to an authorised service
centre to replace damaged or unreadable
labels.
KNOW YOUR PRODUCT
See page 85.
1.
Hanging/Carry handle
2.
USB-A port
3.
LED light / USB function button
4.
UV zapper button
5.
LED light
6.
High voltage grid
7.
Top housing cage
manufacturer's
accessories,
and
extreme
care
and
Werbung
