cecotec POWER ESPRESSO 20 SQUARE PRO Bedienungsanleitung Seite 40

ENGLISH
out.
Hot water preparation
- Place the cup in the steam pipe
- Turn the selector until the hot water icon
flashes, and the machine enters the
water.
- After finishing this process, turn the selector until the coffee icon
process (make sure there is more than 150 ml of purified water in the tank).
Note: make hot water continuously for 120 seconds. If the rotary knob does not return to the
coffee position, it will automatically stop producing hot water. It is necessary to turn back to
the coffee position and then turn to the hot water position to restart the hot water.
Energy saving mode
1. The machine has an energy saving mode.
2. The machine will automatically switch off after 15 minutes and all function indicators will
be displayed.
3. When the machine is off, press the power button again and restart the machine.
Setting the energy saving mode
- At the same time, press and hold the single and double coffee buttons, plug in the power
supply and the on/off button will light up.
- Press the single coffee key, the light of the single coffee button will go out and the power-
saving mode will be cancelled.
- Press the single coffee key, the light of the single coffee button will turn on and the
power-saving mode will be activated.
Descaling mode
1. Place a cup in the water outlet in front of the machine.
2. Put an adequate amount of descaler in the water tank according to the proportion
stipulated by the manufacturer.
3. Press and hold down the single coffee button at the same time and plug in the power
supply.
4. When the lights on the power button and the single coffee button are on, press the single
coffee button to start the descaling function. The device will stop when it runs out of
water.
5. Repeat the process from point 2, but in this case put only purified water to clean the
internal ducts before making coffee again.
Press the single coffee button to stop the process if desired.
40 POWER ESPRESSO 20 SQUARE PRO
, in that moment, the hot water indicator
hot water mode and starts producing hot
, to pause the