stabo freecomm 400 II Bedienungsanleitung Seite 33

Restoring the factory setting (reset)
Remove the battery from the battery compartment. Press the on/off
switch , keep it pressed and insert the plug from the rechargeable
battery into the socket in the battery compartment. When the device
is switched on again, the device has been reset to the factory setting.
Battery low warning
If the capacity of the battery pack is low, bA Lo is flashing on the display
and the battery symbol appears. Now you have to charge the
battery pack.
Earpiece -VOX- microphone
1. Activate the VOX-function (see user manual, page 29)
2. Plug the headset into the speaker/microphone jack.
3. The VOX-function can now be used with the headset.
Note: You can also use the headset without the VOX-function with
the PTT- button.
Care instructions
Clean the housings of the radio sets by means of a slightly damp, lint-
free cloth, do not at all use detergents or solvents.
Protect the radio sets against extreme temperatures and strong vibra-
tions.
Keep the battery contacts clean by means of a dry cloth.
Remove the battery packs, if you do not use your devices for a prolonged
period.
Protect the accessories against humidity/moistness, dust/contamination,
strong vibrations and extreme temperatures.
33