stabo freecomm 400 II Bedienungsanleitung Seite 30

Use the CH-/-key to select a call tone melody.
Confirm by pressing the PTT key: A beep tone sounds.
Activating/deactivating the key tone
Press the MENU key 7x:
Use the CH-/-key to select ON.
Confirm by pressing the PTT key: A beep tone sounds, the
is displayed.
For deactivating press the MENU key again 7x:
is flashing.
Use the CH-/-key to select OF.
Confirm by pressing the PTT key: A beep tone sounds, the
disappears.
Roger beep
When releasing the PTT key after transmission, a signal tone is auto-
matically transmitted. This tone signals to your contact partner that
your message is finished and your partner can talk (this is useful for
instance for disturbed radio communications).
Activating/deactivating the roger beep
Press the MENU key 8x: ro appears and OF is flashing.
Use the CH-/-key to select ON.
Confirm by pressing the PTT key: A beep tone sounds and the roger
beep symbol
For deactivating press the MENU key again 8x: ro appears and ON
is flashing.
Use the CH-/-key to select OF.
Confirm by pressing the PTT key: A double beep tone sounds, the
symbol disappears.
appears and OF is flashing.
is displayed.
30
symbol
appears and OF
symbol