stabo freecomm 400 II Bedienungsanleitung Seite 29

VOX function
This function permits to send without activating the transmit key:
Voices/noises that hit the microphone thus switch on the transmitter
of the radio set.
Adjust the sensitivity according to the environmental noises, so that
the set switches from reception to transmission if your voice volume
is appropriate. You can select between 3 sensitivity levels (level 3 =
highest sensitivity).
Activating/deactivating VOX
Press the MENU key 4x: LE appears and OF and the VOX symbol
are flashing.
Use the CH-/-key to select the desired sensitivity level.
Confirm by pressing the PTT key: A beep tone sounds and the VOX
symbol is displayed.
For deactivating press the MENU key 4x: LE appears and the sensitivity
level and the VOX symbol
Use the CH-/-key to select OF.
Confirm by pressing the PTT key: A beep tone sounds and the VOX
symbol disppears.
Setting the squelch
The squelch can be changed in 3 levels (level 1: very small signal
strength (noise), level 3: large signal strength).
Press the MENU key 5x: in the display flashes
the three levels with the CH-/-key.
Confirm with the PTT key: a beep tone sounds.
Call tone
Push the call key C/DW to emit a tone call that is received by the
partner station. You can select among 10 different call tone melodies.
Selecting the call tone melody
Press the MENU key 6x: the call tone adjusted last sounds, CA is
displayed and the call tone number is flashing.
(phonetic transmission)
are flashing..
29
. Select one of