AMS VICAM--RADAR Bedienungsanleitung Seite 7

CONFIGURING THE RADAR VIA THE APP
Download the app onto your phone:
(application is compatible with Android phones only – for use on a computer, contact us)
Using the app
1: Managing the Wi-Fi settings
2: Updating the system
3: Managing the obstacle detection zone
Connecting to the control unit
- Press the Wi-Fi button to begin searching
- The control unit's name starts with "MSRADAR". The Wi-Fi button lights up following successful pairing.
- Connection takes place automatically if the default password is not changed.
If the Android version being used is 6.0 or lower, location settings must be activated.
Some Android versions are not capable of connecting automatically (e.g. version 4.0).
If the Wi-Fi connection fails, you can use the manual connection process:
- Click "Manuel connect" (Manual connect) and then click "suivant" (next) to connect.
- Find the name of the control unit, "MSRADAR", and enter the default password, "88888888".
- To set a new password, click "change wifi password"
AMS Diffusion - Rue des Galeries - ZA du Chevalement - 59286 Roost Warendin - FRANCE - Tél. +33 (0)3.27.94.44.44 - Fax. +33 (0)3 27 94 44 45
Email : contact@ams-diffusion.fr - www.ams-diffusion.com RCS DOUAI A 451 360 382 - CODE APE 4531Z - SIRET 451 360 382 00035 - TVA FR 55 451 360 382
3. USE
7