Herunterladen Diese Seite drucken

cecotec CONGA QUICK&CLEAN TITANIUM Bedienungsanleitung Seite 42

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 60
ENGLISH
pause the cleaning process.
Press the Start/Pause button on the robot vacuum cleaner or on the remote control to
-
resume the cleaning process.
Returning to the charging base
Press the back home button on the robot or on the remote control in order to send the robot
to the charging base.
Turning off
Hold down the Start/Pause button on the robot to turn it off.
Warning
The robot vacuum cleaner has a power switch (with positions I and 0) located on the lower
part of the main body. If the robot will not be used for long periods of time, it is recommended
to turn it off using this switch. As a safety measure, if the robot is switched off, it will restore
the factory default settings. To operate the robot, the switch must be in the on position (I).
Cleaning modes
This robot includes different modes and functions that can be activated from the remote
control.
Automatic mode. Fig. 20
Press the Start/Pause button on the robot vacuum cleaner or on the remote control, the
-
robot will start the automatic cleaning.
The robot will clean the whole surface, edges, around objects such as tables, chairs etc.,
-
until the battery is low, then it will return to the charging base.
Scrubbing mode. Fig. 21
Attach the mop to the mixed tank and fill the tank with water.
-
Place the mixed tank on the robot vacuum cleaner and select the scrubbing level with the
-
remote control: high, medium or low.
Once you have selected the desired scrubbing level from the remote control, the
-
robot vacuum cleaner will start the All in One function to vacuum, scrub and sweep
simultaneously thanks to its mixed tank.
Note
If you wish to mop, do not fill the water tank.
-
If the robot has the mixed tank installed with water in it, when it leaves the charging base,
-
it will turn around itself to soak the mop.
To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
-
with water before fixing it to the mixed tank. It is also recommended to wash the mop after
42

Werbung

loading