LaserLiner Centurium Express Bedienungsanleitung Seite 21

Slope function up to 5° – horizontal
This function deactivates the automatic sensor. Press the AUTO/MAN
button to activate the function. The positioning buttons enable motorised
tilt adjustment. The X- and Y-axes can be independently adjusted. Press
the TILT button to change to the Y-axis. Refer to the illustrations below.
– X-axis: AUTO/MAN LED is permanently on
!
– Y-axis: AUTO/MAN LED and TILT LED are permanently on
Slope function up to 5° – vertical
When the maximum tilt range of 5° is reached, a warning signal
!
sounds, the prism head stops and the laser flashes. In this case,
reduce the slope angle.
man X-axis
X
man
X
Centurium Express
± 5°
Y
Y-axis
Y
GB 21