Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Status if no DMX-signal
With this function, you can select the status for the case that there is no DMX-signal. You can choose
between „Close" for Blackout, „Hold" for holding the last position, „Auto" for running the internal program and
„Music" for the sound-controlled program-run.
Adjust ventilation fan
With this function, you can adjust the ventilation fan.
Hibernation - power standby mode
With this function you can put the device in the power standby mode. This function will be automatically
activated after a predefined period of time of no DMX activity. In standby mode the lamp/LEDs and all motors
will power down if no DMX signal is sent to the fixture for a period of e. g. 15 minutes (can be user defined).
The fixture will automatically reset and return to normal operation once a DMX signal is sent.
Backlight
With this function you can shut off the display after 2 to 60 minutes.
Reverse display
With this function you can rotate the display by 180°.
User mode
With this function, you can select the DMX channel mode.
Calibration
Wheel adjustment
With this function, you can calibrate and adjust the effect wheels to their correct positions. The password for
this function is „050".
Software V
Software version
With this function you can display the software version of the device.
Reload Def
Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set back to the default
values (shaded).
30/35
00085389.DOC, Version 1.0
Werbung
