PCE Instruments PCE-VT 3900 Bedienungsanleitung Seite 59

If the red X is selected, the route is not yet completed and measurements for previous measuring
spots can be overwritten, for example. When the green tick is selected, this route is completed so
that it restarts when selected again.
8.2 Cancel or interrupt route
It is possible to interrupt a route that has been started and continue it at a later time. This means
that the progress and the already recorded measuring spots remain. When the BACK key or
the MENU key is pressed, the following dialogue window appears:
Fig. 38 Cancel or interrupt route
Selecting the red X interrupts the route and returns to the menu. Selecting the green tick serves
to prematurely complete a route that has not yet been completely measured so that this route
starts again from the beginning when selected again.
If a route has not yet been completed and is selected again, the following dialogue box appears.
This dialogue also appears if the meter is switched off during a route measurement.
Fig. 39 Start new route or continue previous session
To continue the route, the red X must be selected again. This retains the previous progress. If the
green tick is selected, the route is restarted with 0 % progress.
© PCE Instruments
54