First Use; Test - POCO line BCD-86 Bedienungsanleitung

FIRST USE

Before the use of the refrigerator, remove all the packages,
including bottom cushion and foam pads and rubber belts in the
refrigerator.
Adjust the feet and clear the outside and inside of the
refrigerator with warm cloth.
Do not start the refrigerator immediately after vertical
placement. Only start it after 2-6 hours standing to ensure its
proper operation.
To prevent damage to the power cord and any consequence
incidents, the power cord should be not covered by the
refrigerator or other objects. Before switching on the
refrigerator, please check the voltage range of refrigerator
carefully if the same as that of the power supply.
When the refrigerator is first installed, allow it stabilize at normal
operating temperatures for 2-3 hours prior to filling it with fresh
or frozen foods.
If operation is interrupted, wait for 5 minutes before restarting.

TEST

Clean the parts of the refrigerator with lukewarm water on a soft
cloth or with a neutral detergent and with clear water, then wipe
them dry.
Notes: Electric parts of the refrigerator can only be wiped by dry
cloth.
Turn the thermostat knob on the "4" position and turn on
electricity. The compressor begins to work.
Close the door and wait 30 minutes. If the temperature in the
freezer compartment decreased obviously, it shows that the
refrigerator system works well. When the refrigerator operates
for a period of time, the temperature controller will automatically
-36-