cecotec BOLERO DRESSCODE 7000 D Bedienungsanleitung Seite 80

ENGLISH
Spin speed (3)
1. Select a programme.
2. Press this button to select the desired speed.
1000: 0-400-600-800-100
1200: 0-400-600-800-1000-1200
1400: 0-400-600-800-1000-1200-1400
Mute Mode
1. Select a programme.
2. Press and hold the Delay button for approx. 3 seconds. No beeps shall be heard.
3. To reactivate the sound, press the Delay button again for about 3 seconds.
Note: the setting will be saved until next restart.
Child Lock function
1. Select a programme.
2. Press the "Pause/Start" button
3. Press the "Extra Rinse" and "Spin Speed" buttons at the same time for about 3 seconds.
Note:
- When the child lock is activated and the washing programme starts, the display will
alternately show "CL" and the remaining time of the washing cycle.
- Pressing any button will cause the indicator to flash.
- When the wash cycle is finished, "Cl" and "END" alternate on the display.
Press and hold both "Extra Rinse" and "Spin Speed" buttons to unlock the function.
-
- This function locks all buttons except the Start/Pause button and the child lock button
itself.
Deactivate the child lock function before selecting a programme and starting washing.
-
Tips for use
- After a programme is completed, wait for two minutes before opening the door.
- Check whether the water inside the drum has been drained before opening its door. Do not
open the door if there is any water.
- Do not wash only one piece of clothes or garment, as these could cause great unbalance.
Always introduce at least 3 or 4 clothes so that draining can be done smoothly.
- The information given for the programmes different to the eco 40-60 programme are just
indicative.
- The eco 40-60 programme can clean normally soiled cotton clothes declared as washable
at 40ºC or 60ºC, together in the same cycle. This programme is used to assess compliance
with EU eco-design legislation.
80
BOLERO DRESSCODE 7000 D - 7000 STEEL D