Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Internal program 1, Master setting
With this function, you can run the internal program 1.
• Select "SEQ1" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [MODE] in order to return to the main menu.
Internal program 2, Master setting
With this function, you can run the internal program 2.
• Select "SEQ2" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [MODE] in order to return to the main menu.
SET
• Press [MODE] to enter the main menu "SET"
• Press [ENTER] and select COLO, LOAD, VER, UI or MIC by pressing [UP] or [DN].
• Press [ENTER] for selecting the desired sub menu.
COLO (In order to choose this function, MODE should be set to ADDR.)
Static colors
With this function you can select on of 15 different moving static colors.
• Select "ADCL" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [UP] to select "1-15".
• Press [ENTER] to confirm.
• Press [MODE] in order to return to the main menu.
Dimmer intensity of LED colors
With this function you can adjust the dimmer intensity of every LED color.
• Select "ADCL" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [UP] to select "OFF".
• Press [ENTER] to confirm.
• Select "RED/GREE/BLUE or WHIT" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [UP] to select the desired static color "01-255".
• Press [ENTER] to confirm.
• Press [MODE] in order to return to the main menu.
Motor movement
With this function you can adjust the movement of the two motors.
• Select "ADCL" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [UP] to select "OFF".
• Press [ENTER] to confirm.
• Select "MOTO" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [UP] to select the desired static color "01-255".
0-63
64-127 Movement motor 1 only
128-191 Movement motor 2 only
192-255 Movement motor 1 and 2
• Press [ENTER] to confirm.
• Press [MODE] in order to return to the main menu.
No movement
25/30
00094808.DOC, Version 1.0
Werbung
