Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Control Board
The Control Board offers several features: you can simply set the starting address or run the pre-
programmed program.
The main menu is accessed by pressing the Mode-button. Browse through the menu by pressing Up or
Down. Press the Enter-button in order to select the desired menu. You can change the selection by pressing
Up or Down. Confirm every selection by pressing the Enter-button. You can leave every mode by pressing
the Mode-button. The functions provided are described in the following sections.
Default settings shaded.
Main
Sub
menu
menu
ADDR
SUND
MODE
SEQ1
SEQ2
COLO
SET
LOAD
VER
UI
MIC
INFO
DRIT
TEMP
LAMP
ADJU
MODE
• Press [MODE] to enter the main menu "MODE".
• Press [ENTER] and select ADDR, SUND, SEQ1 or SEQ2 by pressing [UP] or [DN].
• Press [ENTER] for selecting the desired sub menu.
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
• Select "ADDR" by pressing [UP] or [DN].
• Press [ENTER], adjust the DMX address by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [MODE] in order return to main menu.
Internal sound controlled program, Master setting
With this function, you can run the internal program sound-controlled.
• Select "SUND" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [MODE] in order to return to the main menu.
Extension
XXX
ADCL
RED
GREE
BLUE
WHIT
MOTO
ON/OFF
X.X.XX
HIBE
BACK
FLIP
80~88%, 85%
XXXC
80-130°C,90°C
CHxx=XXX
OFF/1-15
0-255
0-255
0-255
0-255
0-255
01M-99M, ON
01M-99M, ON
ON/OFF
24/30
Function
DMX address setting /
DMX controlled mode
Internal sound controlled program
(Master Mode)
Internal program 1
(Master Mode)
Internal program 2
(Master Mode)
Static colors
Dimmer intensity of
LED colors
000 – 255 (increasing)
Movement
Restore factory settings
Software version
Standby mode
Display shutoff time
Display reverse 180°
Mic sensitivity
Temperature near LED driver
LED off at temperature
Service function
00094808.DOC, Version 1.0
Werbung
