Press the MODE button to select parameter
and press the SET button to adjust the value.
Resetting
You can reset the computer by pressing
and holding the RESET button for around 3
seconds or by removing the batteries.
If your computer does not display all
segments of the display properly, remove
the batteries and wait 15 seconds before
reinserting. If the segments of the display
become weak, or if your computer does not
turn on when you start using the equipment,
replace the batteries.
Cleaning and maintenance
Wipe the equipment down regularly with a
well-wrung cloth.
Check the condition of the equipment
regularly and tighten any bolts, screws and
nuts as necessary.
Remove the batteries from the computer
if the equipment will not be used for a
prolonged period.
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
•
Complaints
•
Replacements parts
•
Returns
•
Guarantee issues
•
www.schou.com
Environmental information
Electrical and electronic equipment
(EEE) contains materials,
components and substances that
may be hazardous and harmful to
human health and the environment
if waste electrical and electronic equipment
(WEEE) is not disposed of correctly. Products
marked with a crossed-out wheeled bin are
electrical and electronic equipment. The
crossed-out wheeled bin indicates that waste
electrical and electronic equipment must
not be disposed of with unsorted household
waste, but must be collected separately.
Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
© 2019 Schou Company A/S
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.
GB
31