Cleaning Instructions - Therabody RecoveryTherm Hot & Cold Vibration Knee Bedienungsanleitung

Charging Charging
•
To charge the RecoveryTherm Hot & Cold Vibration Knee, remove the
• battery from the control panel and connect it to the included USB-C adapter.
EN
•
The RecoveryTherm Hot & Cold Vibration Knee is USB-C enabled.
The battery level is displayed in the LED indicator on the battery pack, next to
the USB-C connector:
•
•
Note: If using an alternative adapter, ensure that it is from a certified manufacturer and has not
suffered any structural damage. Do not try to use the device while charging.

Cleaning Instructions:

1. The RecoveryTherm Hot & Cold Vibration Knee is NOT waterproof or
machine washable. Do not allow excess liquids or water to enter the product.
2. Remove the battery before cleaning.
3. To clean, wipe the inner surface of the strap with a dampened microfiber
cloth. Wipe down the metallic parts and the flexible fingers.
10
Orange: low charge, blue: mid charge, green: fully charged.
When charging, the LED will flash to indicate it is properly
connected and will turn solid green when complete.